• At this time, the contents of any tracks that are already recorded start to play back.
• Optional pedal operation you perform is also recorded.
5. Use the keyboard to play what you want to record the track you selected.
6. Press the START/STOP button to end recording when you are finished.
E-56
Press the START/STOP button to start recording.
4.
Make the following settings.
• Tone number
• Tempo
3.
Song Memory Function
Recording Multiple Tracks
Track 1 of the keyboard’s song memory records Auto Accompaniment and keyboard play. In addition, there are five other melody tracks that you can use to record melody parts only. You can record different tones to the melody tracks and build a full ensemble of instruments for your recordings. The procedure you use for recording to Tracks 2 through 6 is identical to the one you use when recording to Track 1.
To record to Tracks 2 through 6 using real- time recording
You can record to Tracks 2 through 6 while playing back what you originally recorded on Track 1 and any other tracks that are already recorded.
1. Press the SONG MEMORY button twice to enter record standby, and then use the number buttons to select a song number (0 to 4).
• The song number you select should be the one where you previously input Track 1.
2. Use the SONG MEMORY TRACK buttons to select the track you want to record to (2 through 6).
• While the keyboard is in record standby, the display shows the level meters for channels 11 through 16, so you can check which tracks have already been recorded. See “Level Meter Contents During Record/ Edit Standby” on page E-57 for details.

Track Contents After Real-time Recording

In addition to keyboard notes, the following data is also recorded to the selected track during real-time recording. This data is applied whenever the track is played back.

•Tone number

•Optional pedal operations

The following data is recorded in the header whenever you start a recording of a track.

•Mixer settings of other tracks

•Effect type

•Accompaniment volume

•Reverb Level

•Chorus Level

•DSP Hold On/Off

•Mixer Hold On/Off

To record to Tracks 2 through 6 using step

recording

This procedure describes how to input notes one-by-one, specifying each note’s pitch and length.

1. Press the SONG MEMORY button three times to enter real-time record standby, and then use the number buttons to select a song number (0 to 4).

•The song number you select should be the one where you previously input Track 1.

S t e p R e c

2. Use the SONG MEMORY TRACK buttons to select the track you want to record to (2 through 6).

Example:

Select Track 2.

1

1Flash

707A-E-058A