Press the EFFECT or EXIT button.
• This returns to the tone or rhythm selection screen.
707A-E-028A
3.
Use the [+] and [–] buttons or the number buttons to input the parameter setting you want.
2.
• See the list on page A-13 for information about the types of CHORUS effects that are available.
• Here you could also change the parameters of the effect you selected, if you want. See “Changing the Settings of CHORUS Parameters” for more information.
Changing the Settings of CHORUS Parameters
You can control the relative strength of an effect and how it is applied. The parameters you can control depend on the effect. See the following section titled “CHORUS Parameters” for more information.
1. After selecting the chorus type you want, use the [ ] and [ ] CURSOR buttons to display the parameter whose setting you want to change.
Press the [
] CURSOR button.
3.
4. Use the [+] and [–] buttons or the number buttons to scroll through the chorus types until the one you want is displayed, or use the number buttons to input the chorus number you want to select.
• This displays the chorus editing screen.
• The chorus type setting screen (step 4) will appear automatically about fives seconds after you press the button.
] CURSOR button twice.
Press the [
2.
Same as Reverb Type
• Whether or not an effect is applied to the parts that are sounding also depends on Mixer Mode Reverb Send, Chorus Send, and DSP on/off settings. See “Mixer Function” on page E-36 for more information.
Selecting CHORUS
Perform the following steps to select CHORUS.
1. Press the EFFECT button, so the pointer appears next to EFFECT on the display screen.

Applying Effects to Tones

Changing the Settings of REVERB

Parameters

You can control the relative strength of a reverb and how it is applied. See the following section titled “REVERB Parameters” for more information.

1. After selecting the reverb type you want, use the [ ] and [ ] CURSOR buttons to display the parameter whose setting you want to change.

•This displays the parameter setting screen. Example:To set the Reverb Time parameter

SR v T i me

2. Use the [+] and [–] buttons or the number buttons to input the parameter setting you want.

zER Level

Same as Reverb Type

zHigh Damp
3. Press the EFFECT or EXIT button.

• This returns to the tone or rhythm selection screen.

REVERB Parameters

Reverb effects are associated with either a reverb type or delay type. Parameter settings depend upon the associated type.

„Reverb Type (No. 0 to 5, 8 to 13)

zReverb Level (Range: 000 to 127)Controls the reverb size. A larger number produces larger reverb.zReverb Time (Range: 000 to 127)Controls how long reverb continues. A larger number produces longer reverb.zER Level (Initial Echo Sound) (Range: 000 to 127)

This parameter controls the initial reverb volume. The initial echo sound is the first sound reflected from the walls and ceiling when a sound is output by this keyboard. A larger value specifies a larger echo sound.

zHigh Damp (Range: 000 to 127)

Adjusts the damping of high frequency reverberation (high sound). A smaller value damps high sounds, creating a dark reverb. A larger value does not damp high sounds, for a brighter reverb.

„Delay Type (No. 6, 7, 14, 15)

zDelay Level (Range: 000 to 127)

Specifies the size of the delay sound. A higher value produces a larger delay sound.

zDelay Feedback (Range: 000 to 127)Adjusts delay repeat. A higher value produces a greater number of repeats.
E-26