Synthesizer Mode

zVibrato Delay (Range: –64 to 00 to +63) Specifies the amount of time before vibrato starts.

zReverb Send (Range: 000 to 127) This parameter adjusts reverb.

V i b D e l a y

R v b S e n d

z Vibrato Rate (Range: –64 to 00 to +63)

z Chorus Send (Range: 000 to 127)

Rate (speed) of the vibrato effectThis parameter adjusts chorus.

V i b . R a t e

zVibrato Depth (Range: –64 to 00 to +63) Depth of the vibrato effect

V i b D e p t h

zOctave Shift (Range: –2 to 0 to +2) Up/down octave shift

O c t S h i f t

zLevel (Range: 000 to 127)

This parameter controls the overall volume of the tone. The greater the value, the greater the volume. Setting a level of zero means that the tone does not sound at all.

L e v e l

„Touch Sensitivity (Range: –64 to 00 to +63)

This parameter controls changes in the volume of the tone in accordance with the pressure applied to the keyboard keys. A greater positive value increases the volume of the output as pressure increases, while a negative value decreases volume with increased keyboard pressure. A setting of zero specifies no change in output volume in accordance with keyboard pressure.

T c h S e n s e

C h o S e n d

zDSP Line (Settings: on, oFF)

This parameter controls whether or not the DSP effect is used.

DSP L i n e

DSP Settings

Use the DSP editing screen to select the DSP type and to edit parameters.

1. Select a tone, press the SYNTH button, and then configure parameter settings.

2. After everything is the way you want, press the[ ] CURSOR button once. This advances to the DSP parameter editing screen.

Pressing the [ ] CURSOR button returns to the Synthesizer Mode parameter screen.

This setting specifies DSP parameters. See “DSP Parameters” on page E-24, “Effect List” on page A-13, and “DSP Algorithm List” on page E-83 for more information.

•If you store an original tone with the DSP line turned on (see next page), simply recalling the tone automatically changes the DSP line, DSP type, and DSP parameter settings. This simplifies the recall of original tones that include a DSP effect.

•An indicator appears next to DSP on the display while you are making DSP type or DSP parameter settings.

E-44

707A-E-046A