1:Low (Range: 0 to 127) Adjusts the
The cutoff frequency differs according to the preset DSP.
2:High (Range: 0 to 127) Adjusts the
The cutoff frequency differs according to the preset DSP.
3:Level (Range: 0 to 127) Adjusts the output level.
5:Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from slow to fast.
6:Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow speed mode.
7:Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed mode.
•Function
This is a stereo phaser that modulates the phase in accordance with a sine wave LFO.
•Parameters
0 : Resonance (Range: 0 to 127) Adjusts the resonance of the sound.
1:Manual (Range:
Adjusts the phaser shift volume, which is used for reference.
2:Rate (Range: 0 to 127) Adjusts the rate of the LFO.
3:Depth (Range: 0 to 127) Adjusts the depth of the LFO.
4:Wet Level (Range: 0 to 127)
Adjusts the volume level of the effect.
10:Phaser•Function
This is a monaural phaser that modulates the phase in accordance with a sine wave LFO.
•Parameters
0:Resonance (Range: 0 to 127) Adjusts the resonance of the sound.
1:Manual (Range:
Adjusts the phaser shift volume, which is used for reference.
2:Rate (Range: 0 to 127) Adjusts the rate of the LFO.
3:Depth (Range: 0 to 127) Adjusts the depth of the LFO.
4:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
11:Rotary•Function
This is a rotary speaker simulator.
•Parameters
0:Speed (Range: Slow, Fast)
Switches the speed mode between fast and slow.
1:Break (Range: Rotate, Stop) Stops speaker rotation.
2:Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from fast to slow.
3:Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from slow to fast.
4:Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow speed mode.
5:Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed mode.
12:Drive Rotary•Function
This is an overdrive - rotary speaker simulator.
•Parameters
0:Overdrive Gain (Range: 0 to 127) Adjusts overdrive gain.
1:Overdrive Level (Range: 0 to 127) Adjusts the output level of the overdrive.
2:Speed(Range: Slow, Fast)
Switches the speed mode between fast and slow.
3:Break (Range: Rotate, Stop) Stops speaker rotation.
4:Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is switched from fast to slow.
•Function
Enhances the outlines of the low range and high range of the input signal.
•Parameters
0:Low Frequency (Range: 0 to 127)
Adjusts the low range enhancer frequency.
1:Low Gain (Range: 0 to 127)
Adjusts the low range enhancer gain.
2:High Frequency (Range: 0 to 127)
Adjusts the high range enhancer frequency.
3:High Gain (Range: 0 to 127)
Adjusts the high range enhancer gain.
14:Ring Modulator•Function
This is a ring modulator (AM modulator) that makes it possible to modulate the frequency of internal oscillator (OSC) in accordance with an internal LFO.
•Parameters
0:OSC Frequency (Range: 0 to 127)
Sets the reference frequency of the internal OSC.
1:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.
2:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.
3:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
4:Dry Level (Range: 0 to 127)
Adjusts the level of the original sound.
15•Function
This is an effector that reproduces a
•Parameters
0:Noise Level 1 (Range: 0 to 127) Adjusts the level of Noise Generator 1.
1:Noise Density 1 (Range: 0 to 127)
Adjusts the noise density of Noise Generator 1.
2:Noise Level 2 (Range: 0 to 127) Adjusts the level of Noise Generator 2.
3:Noise Density 2 (Range: 0 to 127)
Adjusts the noise density of Noise Generator 2.
4:Tone (Range: 0 to 127) Adjusts the tone.
5:Resonance (Range: 0 to 127) Adjusts the resonance of the sound.
6:Bass(Range:
7:Level (Range: 0 to 127) Adjusts the output level.
16•Function
This is monaural chorus in accordance with a sine wave LFO.
•Parameters
0:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.
1:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.
|