MIDI

Returning the keyboard to its initial factory defaults

The “Data” folder on the CD-ROM that comes bundled with the keyboard includes a file named “alldata.ckf”, which contains factory default setup data. Transferring the “alldata.ckf” data to the keyboard’s flash memory will return

all settings to their initial factory defaults.

•For information about transferring data to the keyboard’s flash memory, see the application software manual.

•When using the application software, make sure that the tone setting screen (the screen that appears after turning on power) is on the keyboard’s display screen.

•Performing a keyboard operation while transferring data between it and a computer may interrupt the data transfer. Do not perform any keyboard operations while data transfer is in progress.

To connect to a computer

Be sure to turn off the keyboard and your computer before connecting them. You should also set the volume controller of the keyboard to a relatively low volume.

1. Connect the keyboard’s MIDI interface to your computer’s MIDI interface.

DATA ACCESS Lamp

•The DATA ACCESS lamp lights whenever the keyboard is exchanging data with a connected computer over a MIDI cable connection. Never disconnect the MIDI cable while the DATA ACCESS lamp is lit.

CTK-900

2. Turn on the keyboard, and then turn on your computer or other connected device.

3. Start up the software you want to use on your computer.

707A-E-079A

E-77