• See the list on page A-13 for information about the equalizer types that are available.
Example:
To select Jazz
J a z z
• Pressing the EXIT or EFFECT button exits the equalizer setting screen.
Press the [
] CURSOR button.
3.
4. Use the [+] and [–] buttons or the number buttons to select the equalizer type you want.
• This displays the equalizer editing screen.
• The equalizer type setting (step 4) screen will appear automatically about fives seconds after you press the button.
] CURSOR button three times.
Press the [
2.
Specifies the undulation depth of the chorus sound. A higher value produces deeper undulation.
• Whether or not an effect is applied to the parts that are sounding also depends on Mixer Mode Reverb Send, Chorus Send, and DSP on/off settings. See “Mixer Function” on page E-36 for more information.
Using the Equalizer
This keyboard has a built-in four-band equalizer and 10 different settings from which you can choose. You can adjust the gain (volume) of all four equalizer bands within the range of –12 to 0 to +12.
To select the equalizer type
1. Press the EFFECT button so the pointer appears next to EFFECT on the display screen.
Chorus Depth (Range: 000 to 127)
Chorus Rate (Range: 000 to 127)
Specifies the undulation speed of the chorus sound. A higher value produces faster undulation.
Chorus Level (Range: 000 to 127) Specifies the size of the chorus sound.
CHORUS Parameters
Applying Effects to Tones
To adjust the gain (volume) of a band
1. After selecting the equalizer type you want, use the [ 
] and [ 
] CURSOR buttons to select the band whose gain you want to adjust.
Example:
To adjust the HIGH band
ME q H i g h 
Example:
To adjust the gain to 10
ME q H i g h 
•Changing to another equalizer type causes the band gain settings to change to the initial settings for the newly selected equalizer type automatically.