MAP Mode Operation
1.Press [ý] (MAP) to enter the MAP mode.
•Each press of [ý] (MAP) toggles between the User Image mode and the Photogenic Spot mode.
2.Use the procedures below to move a user image mark or a photogenic spot mark near the center of the display’s radar screen lines.
Use [8], [2], [4], and [6].
•To return your current location to the center of the screen, press [ù] (Current Location). This will cause
To scroll the map | (current location) to appear in the center of the radar |
| screen. |
•[ù] (Current Location) is disabled while “Off” is selected for the “GPS” setting (page 92).
| Slide the zoom controller. |
|
| w (Wide Angle): |
|
| Zooms out (reduces the |
|
To change the | scale) so a wider area of the |
|
map is visible. |
| |
scale of the map |
| |
z (Telephoto): | Zoom controller | |
| Zooms in (increases the | |
|
| |
| scale) so a smaller area of |
|
| the map is visible. |
|
•Moving a user image mark or photogenic spot mark to the center of the radar screen causes the corresponding image (user image or photogenic spot image) to move to the top of the image list to the right of the map.
•The images that appear in the list on the screen are displayed in sequence starting from the landmark that is closest to the center of the radar screen and then radiating outwards in a clockwise direction.
102 | Using the |
|