Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.
Small connector
[USB/AV] port

4. Turn off the camera

USB port

and then use the USB

USB cable

cable that comes with

 

the camera to connect

Large connector

it to your computer.

 

• The camera does not draw power over the USB cable. Make sure

the camera’s battery is sufficiently charged

before connecting.

• Make sure that you

insert the cable connector into the USB/

AV port until you feel it click securely into

place. Failure to insert the connector fully can result in poor communication or malfunction.

• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

• When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

•Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port.

5.Turn on the camera.

6.Windows 7, Windows Vista users: Click “Start” and then “Computer”.

Windows XP users: Click “Start” and then “My Computer”.

Windows 2000 users: Doubleclick “My Computer”.

7.Double-click “Removable Disk”.

•Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.

123Using the Camera with a Computer