•The Hybrid-GPS is able to provide position information (latitude and longitude) even under conditions where waves cannot be received from GPS satellites. However, relying solely on the motion sensor for long periods where GPS satellite reception conditions are poor, under an underpass or on a steel bridge, or in the vicinity of buildings, pedestrian bridges, electrical equipment, steel desks, steel chairs, or other objects that generate magnetism can result in bearing, latitude, and longitude reading errors. In order to ensure that position information is as accurate as possible, it is recommended that you occasionally move to an area where there is an unobstructed path to the sky above to perform GPS satellite wave reception. The motion sensor uses GPS satellite wave reception data to calibrate its own data.
•The direction sensor may not be able to perform direction measurements under any of the following conditions.
–Immediately after “On” is selected for the “GPS” setting (page 92)
–Immediately after loading the battery and turning on the camera
•Do not operate the GPS function while operating a motor vehicle.
•The GPS function of this camera uses WGS84 (World Geodetic System 1984).