Problem

Possible Cause and Recommended Action

 

The time and date

Load the camera’s battery and reconfigure the time and date

 

settings configured

settings (page 20). Do not remove the battery from the camera

 

the first time after

for at least 24 hours after configuring time and date settings.

 

purchasing the

After that, the settings will not be reset if you remove the

 

camera are reset to

battery.

 

their factory

• If the time and date are reset to their factory default settings

 

defaults when

when you remove the battery after it has been loaded for

 

remove the

more than 24 hours, it could mean that the camera’s setting

 

camera’s battery.

memory is defective. Contact your retailer or a CASIO

 

 

authorized service center.

 

Buttons are not

With large capacity memory cards there is a delay after the

 

responsive right

power has been turned on before the buttons become

 

after the power has

responsive.

 

been turned on.

 

 

 

 

Display Messages

 

The camera’s protection function may have activated

ALERT

because camera temperature is too high. Turn off the

camera and wait until it cools down before trying to use it

 

 

again.

Battery is low.

Battery power is low.

Cannot find the

The image you specified with the slideshow “Images” setting

cannot be found. Change the “Images” setting (page 80) and

file.

try again.

 

Cannot register

You are attempting to save a user BEST SHOT scene in the

“SCENE” folder when the folder already contains 999 user

any more files.

scenes (page 54).

 

 

There is something wrong with the memory card. Turn off the

 

camera, remove the memory card and then reload it into the

 

camera. If this message re-appears when you turn the

 

camera back on, format the memory card (page 151).

Card ERROR

 

IMPORTANT!

 

 

 

 

• Formatting a memory card deletes all its files. Before

 

 

formatting, try transferring recoverable files to a computer

 

 

or some other storage device.

Check

You are attempting to connect the camera to a printer while

the camera’s USB settings are not compatible with the USB

connections!

system of the printer (page 115).

 

Files could not be

 

 

 

saved because

Battery power is low, so an image file could not be saved.

battery is low.

 

 

 

176

Appendix