Using Flash (Flash)
1.In the REC mode, press [2] ( 
) once.
2.Use [4] and [6] to select the flash setting you want and then press [SET].
Flash
[2] (
)
> Auto Flash | Flash fires automatically in accordance with exposure | |
(amount of light and brightness) conditions. | ||
|
?Flash Off Flash does not fire.
Flash always fires. This setting can be used to brighten a
<Flash On subject that normally comes out dark due to daylight or backlight (daylight synchro flash).
_Soft Flash Soft flash always fires, regardless of exposure conditions
¥ | Red Eye | Flash fires automatically. This type of flash can be used to |
Reduction | reduce the chance of redness in the subject’s eyes. | |
|
|
|
3.Press the shutter button to shoot.
| Back lamp |
| Flashes orange while the flash is charging to indicate that image |
A | recording is disabled. |
| • You will not be able to take another flash snapshot until the lamp |
stops flashing orange, which indicates that charging is complete.
<indicates the flash will fire.
• For information about Flash Range, see page 182.
37 | Snapshot Tutorial |
|