Displaying Images with Location Information (PLAY Mode)
As with normal images (without location information), use the PLAY mode to display images with location information.
Viewing an Image with Location Information
See page 30 for the procedure for viewing images.
•While an image with location information is on the display, pressing [8] (DISP) will display the location information (latitude and longitude) that was recorded with the image.
IMPORTANT!
•In the PLAY mode, you cannot display the map where the image was recorded while the image is displayed.
Latitude and longitude
Place name
(Name scrolls if it is too long to fit.)
Clearing Location Information Included with an Image (Delete Site Info)
Use this procedure when you want to clear the location information (latitude, longitude, direction, place name) recorded with an image.
IMPORTANT!
• Remember that a location information delete operation cannot be undone.
1.In the PLAY mode, use [4] and [6] to select the image whose location information you want to clear.
2.Press [MENU]. On the “PLAY” tab, select “Delete Site Info” and then press [6].
3.Use [8] and [2] to specify what you want to clear and then press [SET].
Delete Lat/Long | Deletes the latitude, longitude, and direction recorded with | |
the image. | ||
| ||
Delete place | Deletes the place name recorded with the image. | |
Cancel | Cancels the operation without deleting anything. | |
|
|
109 | Using the |
|