Problem

Possible Cause and Recommended Action

 

 

A recorded image

1)Camera power may have been turned off before the save

 

was not saved.

operation was complete, which will result in the image not

 

 

being saved. If the battery indicator shows

, charge the

 

 

battery as soon as possible (page 19).

 

 

 

2)You may have removed the memory card from the camera

 

 

before the save operation was complete, which will result in

 

 

the image not being saved. Do not remove the memory card

 

 

before the save operation is complete.

 

 

 

 

 

Though available

Not enough light is reaching the subjects. Change the flash

 

lighting is bright,

mode setting to < (Flash On) for daylight synchro flash (page

 

the faces of people

37), or adjust EV shift to the + side (page 46).

 

 

in the image are

 

 

 

dark.

 

 

 

 

 

 

Night shots come

Use the following BEST SHOT scenes (page 52) when shooting

 

out bad.

at night.

 

 

 

• Night Scene (for shooting night scenery only)

 

 

 

• Night Scene Portrait (for shooting people against night

 

 

scenery)

 

 

 

 

 

Subjects are too

Sunlight reflected by water, sand, or snow, can cause

 

dark when shooting

underexposure of images. Change the flash mode setting to <

 

images in a

(Flash On) for daylight synchro flash (page 37), or adjust EV

 

seashore or ski

shift to the + side (page 46).

 

 

area.

 

 

 

 

 

 

Digital zoom

The digital zoom setting may be turned off. Turn on digital zoom

 

(including HD

(page 63).

 

 

zoom and Single

 

 

 

SR Zoom) does not

 

 

 

work. The zoom

 

 

 

bar indicates zoom

 

 

 

only up to a zoom

 

 

 

factor of 10.0.

 

 

 

 

 

 

The image is out of

1)Focusing may not be possible because the subject is outside

 

focus during movie

the focus range. Shoot within the allowable range.

 

recording.

2)The lens may be dirty. Clean the lens (page 158).

 

 

 

 

172

Appendix