Creating a Dynamic Photo Image

Your digital camera comes with a number of subjects in its built-in memory (“built-in subjects”). You can use these built-in subjects to create Dynamic Photo images by inserting them into your original snapshots or movies.

Step 1: Shoot the image into which you want to insert

an built-in subject.

1.Remove the memory card from the camera (if one is loaded).

You will not be able to access the built-in subjects while a memory card is loaded in the camera.

2.In the REC mode, compose the image and press the shutter button to shoot a standard snapshot.

You will insert the built-in subject into the snapshot you shoot here.

Step 2: Create the Dynamic Photo image.

Now simply insert a built-in subject into the snapshot or movie you shot in step 1 to create your own original Dynamic Photo image.

1.Press [p] to enter the PLAY mode.

2.Perform the following operation on the camera [MENU] * PLAY tab * “Dynamic Photo”.

3.Use [4] and [6] to select the background image you want and then press [SET].

Select the image you want to use as the background. Here, select the image you recorded in step 1 of this procedure.

*Only images that are able to be used as background images will appear for selection at this time.

•Only an image that satisfies the following conditions can be used as a background image.

–A snapshot or movie recorded with this camera or a snapshot transferred to this camera’s memory using Photo Transport

–A snapshot with an aspect ratio of 4:3

3

Creating a Dynamic Photo Image