Viewing High-quality Movies on a Hi-Vision Television

Use a commercially available HDMI cable to connect the camera to the TV. For information about playback, see page 76.

• Use a commercially available HDMI cable that is marked with the logo shown to the right.

HDMI connector

HDMI cable (commercially available)

 

HDMI output

HDMI input

(Mini)

Terminal

HDMI mini connector

cover

 

IMPORTANT!

• Output to a TV is not supported in the REC mode.

NOTE

•Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini connector on one end, and a plug that is compatible with your TV’s HDMI connector on the other end.

•Proper image and/or audio output and other operations may not be possible with some devices.

•Connecting the camera to the HDMI connector of another device can damage both the camera and the other device. Never connect two HDMI output connectors to each other.

•Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information about requirements before plugging into or unplugging from the TV.

•When cables are connected to both the USB/AV port and the HDMI output connector, the HDMI output connector connection is given priority.

•Disconnect the HDMI cable when you are not using HDMI output. The camera’s monitor screen may not operate normally while the HDMI cable is connected.

•Audio is monaural.

•Some TVs may not be able to output images and/or audio correctly.

•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.

78

Viewing Snapshots and Movies