Casio FXCP400 [OK], window, factor, Do this:, of zoom:, boundary, to reduce, To enlarge the, area enclosed in a, To perform this type, To enlarge or reduce

Panning the Graph WindowYou can drag the Graph window screen to scroll (pan) its contents.

uClassPad Operation

1.Holding the stylus anywhere against the Graph window, drag it in the direction you want.

•This causes the Graph window to scroll automatically in accordance with the dragging.

2.When the Graph window shows the area you want, remove the stylus from the display.

•This causes the graph to be redrawn on the Graph window.

Tip

•Graph window panning cannot be performed while any one of the following functions is being used: Modify, Trace, Sketch, G-Solve, box zoom.

•While a panning operation is in progress on the Graph window, the coordinates of the point where the stylus is held against the display is displayed in the status bar.

Scrolling the Graph Window

You can use either of the two operations to scroll the Graph Window up, down, left, or right.

•Tapping the graph controller arrows at the edges of the Graph window.•Using the cursor key.

Display of the graph controller arrows is turned off under initial default settings.

Use the Graph Format dialog box to turn them on, if you want. For more

information, see “Graph Format Dialog Box” on page 36.Zooming the Graph Window

Graph controller arrows

Your ClassPad provides you with a wide selection of zoom commands that you can use to enlarge or reduce an entire graph or a specific area of a graph.

To perform this type	Do this:
of zoom:
To enlarge the	1.	Tap [Zoom] and then [Box], or tap Q.
area enclosed in a	2.	On the Graph window, drag the stylus to draw a selection boundary around the
boundary
		area you want to enlarge.
	3.	Remove the stylus from the display.
		• The area within the selection boundary will expand to fill the entire Graph
		window.
To enlarge or reduce	1.	Tap [Zoom] and then [Factor].
to a specified numeric	2.	On the dialog box that appears, input the x- and y-axis zoom factor, and then tap
factor		[OK].
	3.	Tap [Zoom] - [Zoom In] to enlarge to the specified factor, or [Zoom] - [Zoom Out]
		to reduce.

Chapter 3: Graph & Table Application 103