Transfer ClassPad display image data to the computer

For information about connecting ClassPad and Screen Receiver, see the Screen Receiver User’s Guide.

Computer System Requirements

• Windows XP Home Edition

• Windows Vista (32-bit)

• Windows XP Professional (32-bit)

• Windows 7 (32-bit, 64-bit)

•Windows 8 (32-bit, 64-bit)

•Mac OS 10.5, Mac OS 10.6, Mac OS 10.7, Mac OS 10.8

Connecting and Disconnecting with a Computer in the USB Flash Mode

Establishing a USB connection between ClassPad and a computer will cause the computer to recognize the ClassPad’s storage area as a USB Flash Drive.

Important!

Do not touch the USB cable plugs and screen while a data communication operation is in progress. Static electricity from your fingers can cause data communication to be terminated.

uTo establish a connection between ClassPad and a computer

1. Connect one end of the USB cable that comes with the ClassPad to the USB port of your computer.

2. Connect the other end of the USB cable to the ClassPad as shown nearby.

• The ClassPad will turn on automatically and the “Select Connection Mode” screen will appear.

3.Tap [USB Flash].

•Establishing a connection between the ClassPad and a computer will cause the screen shown nearby to appear.

4.On your computer, open the ClassPad drive.

•The ClassPad drive represents the ClassPad’s storage area.

5.Perform the required operation on your computer to transfer the data.

uTo terminate the connection between the ClassPad and a computer

1.Depending on the type of operating system your computer is running, perform one of the following operations.

Windows: First, check the drive letter (E, F, G, etc.) assigned to the ClassPad drive. Click the “Safely Remove Hardware” icon in the toolbar in the lower right corner of the display. On the menu that appears, select the “USB mass storage device” whose letter matches the ClassPad drive letter. Check to make sure the “Safe To Remove Hardware” message is displayed.

Mac OS: Drag the ClassPad drive icon to the Eject icon (Trash icon). Check to make sure that the ClassPad drive icon is no longer on your desktop.

2.The message “Complete!” will appear on the ClassPad screen. To close the message dialog box, tap [OK].

3.Disconnect the USB cable from the ClassPad.

Chapter 15: Performing Data Communication

251