uTo draw a line segment

1.Tap [Draw] - [Basic Object] - [Line Segment], or tap y.

2.Tap the screen where you want the line segment to begin, and a point will be drawn, and then tap the point where you want it to end.

uTo add a labeled point to an existing line

1.Tap [Draw] - [Basic Object] - [Point], or tap [.

2.Drag the stylus to the location on the line where you want to add a labeled point, and then lift the stylus from the screen.

uTo draw an infinite line

1.Tap [Draw] - [Basic Object] - [Infinite Line], or tap w.

2.Tap two points on the screen through which you want the infinite line to pass.

uTo draw a ray

1.Tap [Draw] - [Basic Object] - [Ray], or tap b.

2.Tap two points on the screen, or tap one point and then drag to the second point.

uTo draw a vector

1.Tap [Draw] - [Basic Object] - [Vector], or tap H.

2.Tap the point where you want the vector to start, and then its end point.

uTo draw a circle

1.Tap [Draw] - [Basic Object] - [Circle], or tap U.

2.Tap the point where you want the center of the circle to be, and then tap a second point anywhere on the circle’s circumference.

uTo draw an arc

1.Tap [Draw] - [Basic Object] - [Arc], or tap P.

2.Tap the point where you want the center of the arc to be, and then tap a second point to designate where you want the arc to start.

3.Tap a third point, which is where you want the arc to end.

Chapter 8: Geometry Application

152