2.On the Command menu, select the command you want to execute.

For information about what is calculated by each command, see “Tests” (page 141),“ConfidenceIntervals”(page143),and “Distributions” (page 145).

3.Select “List” to use list data for calculation, or “Variable” to directly input values using a wizard.

Certain commands require data of a specific type (list, variable, or matrix) for calculation. For such commands, you will not be provided with a choice of data type options.

4.Tap [Next >>].This displays a screen for specifying conditions and inputting values.

Initially, the top item on the screen will be selected, with help text about the top item shown at the bottom of the screen. Tapping another item will select it and display help text about it.

5.Input values and configure settings for each of the items on the screen.6.Tap [Next >>].This displays the calculation results.7.Tap $ to graph the results.You cannot graph interval calculations and inverse distribution calculations.

Tip: You can back-step through the wizard by tapping [<< Back]. After returning to a previous screen you can change settings and values and recalculate results. Closing the wizard screen clears all settings and values.

Type menuCommand menuHelp text

Displayed when the [Help] check box is selected.

Chapter 7: Statistics Application

140