3-3 Using Table & Graph

The Graph & Table application includes a “Table window” for displaying number tables and summary tables generated with the functions you input on the Graph Editor window.

Generating a Number Table

A number table can be created for one or more y=Type, r=Type, or ParamType (Parametric Type) functions registered on the Graph Editor window.

y=Type: (x, y) number table

r=Type: (, r) number table ParamType: (t, xt, yt) number table

The following are the two methods that can be used to create a number table using the Graph & Table application.

Specifying the value range of x, , or t using the Table Input dialog box

Specifying the value range of x, , or t using a list stored in ClassPad memory

Tip

The derivative is also included in the number table when the Graph Format “Derivative/Slope” check box is selected.

You can specify the width of table cells using the [Cell Width Pattern] on the Graph Format dialog box (page 36).

uTo generate a number table by specifying a range of values for x, , or t using the Table Input dialog box

1.On the Graph Editor window, input the function(s) you want to use for number table creation, and select the check box(es) to the left of the function(s) you want to use.

2.Tap the [Type] menu, and then select the type ([y=Type], [r=Type], or [ParamType]) of the function(s) you want to use for number table creation.

3.Tap 8 to display the Table Input dialog box.4.Input the values for the x-, -, or t -values of your table, and then tap [OK].5.Tap # to generate the number table and display it on the Table window.

Tip: The above operation is possible only when “Table Input” (which is the initial default) is selected for the Graph Format dialog box [Table Variable] item.

Chapter 3: Graph & Table Application

106