2. On the Reset dialog box, select the type of reset operation you want to perform.

To delete this type of data:Select this option:

All variable and program data in main memory

Variable/Program

 

 

All eActivity data in eActivity area

eActivity Data

 

 

Data in storage area

Storage Memory

 

 

All of the above three types

All of the above

 

 

3.After selecting the type of reset operation you want to perform, tap [Reset].

4.In response to the confirmation message that appears, tap [OK] to perform the reset operation and return to the application menu.

uTo initialize your ClassPadWarning!

Initializing the ClassPad deletes anything you have input and stored in memory (including eActivity data) since you purchased the ClassPad or last initialized it. Before initializing the ClassPad, double-check to make sure you do not need any of the data that will be deleted.

1.On the System application window, tap [System] - [Initialize], or n.

•This displays a confirmation asking if you really want to initialize your ClassPad.

2.Tap [OK] to perform the initialize operation.

•The initialize operation may take several minutes to complete (depending on the amount of data stored in memory).

•After the initialize operation is complete, the touch panel alignment screen will appear. Follow the instructions on the screen to configure initial settings. For more information about the setup operation, see “Replacing Batteries and Setting Up the ClassPad” in the separate Quick Start Guide.

uTo adjust display brightness

1.On the System application window, tap [System] - [Display Settings], or Z.

2.Tap tor uto change display brightness, and then tap [Set].

• Tapping [Initial] returns display brightness to its initial default.

uTo configure power properties

1.On the System application window, tap [System] - [Power Properties] - [Power], or X.

2.On the dialog box that appears, perform the operations described below.

To do this:

Do this:

Specify the Auto Power Off trigger time

Tap the “Auto Power Off” down arrow button and then select

 

10 min or 60 min.

 

 

Specify the backlight duration

Tap the “Backlight Duration” down arrow button and then

 

select 30 sec, 1 min, 3 min, or 10 min.

 

 

3. After all the settings are the way you want, tap [Set].

uTo specify the battery type

1.On the System application window, tap [System] - [Power Properties] - [Battery], or m.

2.Tap the type of battery you loaded and then tap [Set].

3.On the confirmation dialog box that appears, tap [OK].

• This registers the selected battery type and closes the confirmation dialog box.

Chapter 14: System Application

246