Casio KL-8100 manual Part 1 Getting Acquainted, Important Precautions

To print a preset phrase E-22

Part 11 Stamp Printing	E-22
To create a new stamp label	E-23
To store a stamp label	E-23
To recall a stamp label from memory	E-23
To delete a stamp label from memory	E-23

Part 12 Memory	E-23
To store data	E-23
Recalling Text From Memory	E-23
To recall memory text using sequential search ..	E-23
To recall memory text using character search ...	E-24
To delete memory text	E-24
Part 13 Data Communication	E-24
Part 14 Reference	E-24
Cleaning the Printer Head and Roller	E-24
To clean the printer head and roller	E-24
Initial Settings	E-24
Initializing the Label Printer	E-25
To initialize the label printer	E-25
Format Indicator	E-25
Tape Length Indicator	E-25
Illustrations	E-25
Symbols, Dingbats, and Special Characters	E-25
Frames	E-25
Fonts	E-25
ENLARGED Label Measurements	E-26
Phrases	E-26
Bar Code Specifications	E-26
Troubleshooting	E-27
Error Messages	E-28
Specifications	E-29

Part 1 Getting Acquainted

This part of the manual provides you with important infor- mation you need to know in order to use the label printer to its full potential. Be sure to read it carefully before using the label printer for the first time.

Important Precautions

•Keep your label printer out of areas subject to tempera-

ture extremes, moisture and direct sunlight. The recom- mended temperature range is 10° to 35°C (50° to 95°F).

•Don’t let coffee, juice or other liquids splash onto the label printer.

•Never let paper clips, pins or other foreign objects get into the tape outlet slot or printer of the label printer.

•Do not pile heavy objects on top of the label printer.

•Never try to take the label printer apart or attempt your own maintenance.

•Do not drop your label printer and avoid strong impact.

•Do not pull on the tape or try to force it back into the label printer.

•Never operate the tape cutter lever when a tape cartridge is not loaded in the label printer. Doing so can damage the cutter blade.

•Never touch the printer head with your fingers.

•Take care to avoid applying too much pressure to the tape cutter lever. Doing so can damage it.

•Do not use benzine, thinner, or other volatile chemicals to clean the exterior of the label printer. Use a soft, dry cloth or a cloth dampened in a weak solution of a mild, neutral detergent and water. Wring the cloth out until all excess moisture is removed.

•A dirty printer head can cause printing to become smudged. When this happens, clean off the printer head by wiping it with a cotton swab moistened with alcohol (page E-24).

•Use of the label printer next to a television or radio may interfere with reception.

E-4