Recording and Play Back

To record to a specific track of a specific song

After recording to either of the tracks of a song, you can record to the other track while listening to playback what you recorded in the first track.

1. Press the RECORDER button so the PLAY lamp is lit.

2. Use the + and – buttons to display a song number (1 to 5).

3. Press the RECORDER button so the REC lamp is flashed.

•At this time the L/1 lamp will flash to indicate that the digital piano is standing by for recording to Track 1.

4.Use the PART/TRACK button to select the track to which you want to record.

•Make sure that the indicator lamp for the record track is flashing.

Track 1: L/1 lamp

Track 2: R/2 lamp

Example: Track 1 Selected

E-18

5. Select the tone and effects you want to use in your recording, and set the tempo you want.

•Tone (page E-7)

*After selecting the tone you want, press the TONE/ SONG button one more time so the SONG lamp is lit.

•Effect (page E-11)

•Tempo (page E-24)

NOTE

•It is a good idea to use a relatively slow tempo when recording.

•If you want the metronome to sound during recording, press the METRONOME button.

6. Start playing something on the keyboard.

•Recording will start automatically.

7.To stop recording, press the SONG PLAY/ STOP button again.

•This will cause the REC lamp to go out, and the lamp above the button of the track to which you recorded will light.

•To play back the track you just recorded, press the SONG PLAY/STOP button.

8.After you are finished recording or playing back, press the RECORDER button so the

PLAY lamp and REC lamp are off.