Recording and Play Back
To record to one track of a song while listening to the playback of the other track
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the + and – buttons to display a song number (1 to 5).
This indicator appears when the track already contains recorded data.
3. Press the RECORDER button so the REC lamp is flashed.
•This will cause the L/1 lamp to flash.
4.Use the PART/TRACK button to select the track to which you want to record.
•Make sure that the indicator lamp for the record track is flashing.
Example: To listen to playback of Track 1 as you record to Track 2
Lit (Play) | Flashing (Record Standby) |
5. Select the tone and effects you want to use for your recording.
6. Press the SONG PLAY/STOP button or play something on the keyboard.
•This will start both playback of the recorded track and recording to the other track.
7.To stop recording, press the SONG PLAY/ STOP button.
Playing Back from Digital Piano Memory
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the + and – buttons to display a song number (1 to 5).
NOTE
•When a song has something recorded in both tracks, you can turn off one track and play back just the other track, if you want. Whether a track is on or off is indicated by the lamps above the PART/TRACK button. Each press of the PART/TRACK button cycles through the different possible track on/off settings.
3. Press the SONG PLAY/STOP button.
This starts playback of the song and/or track you selected.
NOTE
•You can change the tempo setting as a track is playing.
•You cannot change the tone setting during playback.
•Press the SONG PLAY/STOP button again to stop playback.