Assembling the Stand

3.

With the speaker box C laying on its side as

• Insert screw caps at the locations indicated in the

 

illustration and press them in as far as they will go.

 

shown in the illustration, secure side panels

 

 

 

 

 

A and B to the speaker box C. Secure the

 

 

 

side panels using four screws D.

 

 

 

• Align the screw holes of the speaker box C with the

 

 

 

screw holes of the side panels as you install the

 

 

 

screws D.

 

 

 

• Partially tighten the screws on one side of the speaker

 

 

 

box C and then fully tighten the screws on the other

 

 

 

side.

 

 

 

• Next, fully tighten the screws that you partially

 

 

 

tightened.

 

 

 

B

 

 

 

D

5. Attach the brackets I to the pedal unit F,

 

 

 

 

and temporarily secure them with screws G.

 

A

 

 

 

 

 

G

 

C

 

 

 

 

 

G

D

 

 

 

 

 

I-(a)

F

•You can also install the speaker box C so it faces

towards the back of the stand.

I-(b)

 

4. After ensuring that all of the screws are fully

6. Remove the screws that hold the corner

tightened, remove the packing material and

stand up the stand.

brackets in place on the back corners (the

 

• Cover each of the eight side panel screws with screw

corners away from the pianist) of the side

caps E.

panels.

 

E

E

E-37