Casio PX-800 E-38, WARNING, Locating the Stand against a Wall

Assembling the Stand

7. Turn around the corner brackets as shown in

the illustration, and insert them between pedal unit brackets I-(a)and I-(b), and the edges of the side panels.

I-(a)

I-(b)I-(b)

WARNING

•The corner brackets help to prevent the stand from tipping over. Whenever the stand is in a location that is not up against a wall, reorient the corner brackets as shown in the illustration. Leaving the corner brackets in their original orientations can make it easy for the stand to tip over towards the back, creating the risk of personal injury.

Locating the Stand against a Wall

Leaving the anti-tipping brackets in their original orientation, insert the pedal unit brackets between the anti-tipping brackets and the edges of the side panels.

E-38

8. Secure the corner brackets to the stand using the screws you removed in step 6.

IMPORTANT!

•When tightening the corner bracket screws, press down on the pedal unit to ensure that the pedal part comes into contact with the floor.

•The side panels have joint connectors inside that engage with the corner bracket screws. If you have trouble inserting the screws into the joint connector screw holes, use a screwdriver to rotate the joint connector and adjust the position of the screw hole for easier access. See the detail drawing (marked with a star) in the above illustration.

Contents

USER’S GUIDE GUÍA DEL USUARIO Safety Precautions Precauciones de seguridad IMPORTANT SAFETY INSTRUCTIONS Declaration of Conformity NOTICE FCC WARNING Page Contents General Guide CAUTION bn SONG PLAY/STOP button bo TEMPO/SETTING button bp PART/TRACK button MIDI OUT/IN terminals E-4 /NO) /YES) Power Supply Connections Connecting Audio Equipment (Figure 1) Connecting a Music Amplifier (Figure 2) Playing with Different Tones Selecting a Tone Using the Keyboard Keys E-9 E-10 GRAND PIANO To configure reverb and chorus effect settings To turn acoustic resonance and DSP on or off Pedal Functions zDamper Pedal zSoft Pedal zSostenuto Pedal METRONOME To adjust the metronome volume Playing Back Built-inSongs SONG PLAY/ STOP E-16 Recording and Play Back Memory Capacity Recorded Data Recording Data Storage Using the RECORDER Button PLAY REC E-18 E-19 E-20 Configuring Settings with the Keyboard TUNE/OTHERS MIDI/OTHERS E-22 ■ Keyboard E-23 ■ Tones ■Song/Metronome E-24 ■ MIDI E-25 Connecting to a Computer What is MIDI MIDI Connections MIDI Settings To connect to a computer using the USB port To install Adobe Reader (Acrobat Reader*2) Minimum Computer System Requirements Supported Operating Systems Driver Minimum Computer System Requirements E-28 Operating System zStorage zUSB Interface Using an SD Memory Card SD Memory Card and SD Memory Card Slot Precautions Using an SD Memory Card with the Digital Piano To insert an SD memory card To remove an SD memory card To transfer song data from an SD memory card to the digital piano user area To transfer song data from an SD memory card to the recorder area E-33 E-34 Assembling the Stand E-36 E-37 WARNING Locating the Stand against a Wall E-38 To tighten the joint connector and screw E-39 E-40 Reference E-42 E-43 ■Location ■User Maintenance ■Included and Optional Accessories ■Weld Lines ■Musical Instrument Etiquette Appendix/Apéndice A-2 A-3