Using an SD Memory Card
To transfer song data from an SD memory card to the recorder area
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the + and – buttons to display the number of the recorder area song (1 through 5) to which you want to transfer the data.
This mark indicates that the currently displayed song number has data stored already.
3. Hold down the CARD button until its lamp starts to flash slowly and “Ldr” (Load recorder area) appears on the display.
4. Use the + and – buttons to display the song number of the data you want to transfer to digital piano memory.
5. When everything is the way you want, press the TEMPO/SETTING button to begin data transfer.
•The message “CPL” (ComPLete) will appear on the display to let you know when data transfer is complete. The number of the recorder area to which the data was transferred will be shown on the display.
zTo interrupt an ongoing data transfer operation, press the CARD button.
zIf the recorder area song number you select already contains data, pressing TEMPO/SETTING in step 5 will display “rEP” (rEPlace) to confirm that you
want to replace the existing data with the data you are transferring. Press the S/YES button to replace the data. To cancel the operation, press the T/NO button in place of the S/YES button.
Saving Song Data Recorded on the Digital Piano to an SD Memory Card
You can save song data that you recorded on the digital piano to an SD memory card as SMF Format 0 data or CASIO CSR data.
PREPARATION
•Insert an SD memory card that has been formatted on the digital piano into the digital piano’s SD memory card slot. Make sure that the
IMPORTANT!
•Never perform any operation on the digital piano while data is being saved to or transferred from an SD memory card. Performing any operation can cause SD memory card data to be deleted or damaged, making transfer of the data impossible.
1. Press the RECORDER button so the PLAY lamp is lit.
2. Use the + and – buttons to display the song number (1 to 5) of the song you want to save.
3. Hold down the CARD button until its lamp starts to flash slowly and “Ldr” (Load recorder area) appears on the display.
4. Press the CARD button again.
•This will cause the CARD button lamp to flash at a higher speed and “SvC” (Save as CSR file) to appear on the display. This indicates that the song will be saved as CASIO format CSR data.
•If you want to save the song as SMF Format 0 data, press the CARD button again. This will cause “SvS” (Save as SMF0 file) to appear on the display.