Assembling the Stand
PREPARATION | 2. Plug the speaker box C cable into the | |||||||||
• Before starting assembly of the stand, divide the | speaker connector on the bottom of the digital | |||||||||
polystyrene foam packing material K into the sections | piano. | |||||||||
shown in Figure 1. Use the packing material to secure | ||||||||||
• Stand the speaker box C up on its edge as shown in | ||||||||||
side panels A and B as shown in Figure 2. You will have | ||||||||||
the illustration when connecting the cable. | ||||||||||
an easier time assembling the stand if the side panels are | ||||||||||
• Press the plug fully into the connector as far as it will | ||||||||||
raised as shown in the illustration. | ||||||||||
• If you do not have any packing material available for | go. | |||||||||
|
|
|
|
| ||||||
some reason, use a magazine or some other thick item. |
|
|
|
|
| |||||
Figure 1 |
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
Figure 2
C
• When disconnecting the connector, press the hook as shown in the illustration below as you pull out.
1. Attach side panels A and B to the digital piano. Secure the side panels using four screws D.
B D
A
D