Configuring Settings with the Keyboard

To configure settings with the keyboard

1. Use the “Keyboard Setting Reference” on page E-23 to find the setting you want to configure, and note its keyboard key.

Example: To change the key, you would need to use the keyboard key labeled TRANSPOSE

2. While holding down the TEMPO/SETTING button, press the keyboard key for the setting you want to configure. In this example, we will press the TRANSPOSE key. Keep the TEMPO/SETTING button depressed until you finish step 3 of this procedure.

The TEMPO/SETTING button lamp will flash and the current setting of the item you are configuring will appear on the display.

3. Use the + and buttons to change the setting.

Example: Lower the TRANSPOSE by one semitone by changing the displayed value to –1.

4. Release the TEMPO/SETTING button to complete the setting procedure.

This causes the indicator lamp above the button to turn off.

NOTE

Pressing the + and buttons at the same time will change the displayed setting to its default value.

To configure a setting using the TUNE/OTHERS key

Pressing the TUNE/OTHERS key in step 2 of the above procedure will toggle between the two settings described below.

Tuning setting

Pre-count setting

(“P” stands for “Pre-count”.)

To configure a setting using the MIDI/OTHERS key

Pressing the MIDI/OTHERS key in step 2 of the above procedure will cycle between the two settings described below.

Send Channel setting

(“C” stands for “Channel”.)

Local Control setting

(“L” stands for “Local”.)

E-22