Using an SD Memory Card
4. To stop playback, press the SONG PLAY/ STOP button.
5. After you are finished using the SD memory card, keep pressing the CARD button until its lamp turns off.
NOTE
•You can change tempo, volume, and
Transferring Song Data from an SD Memory Card to Digital Piano Memory
You can use the procedures in this section to transfer song data from an SD memory card to the digital piano user area*1 or recorder area.*2
*1 Music Library Songs 61 to 70
*2 Memory area where songs recorded on the digital piano are stored.
zSupported Data
User Area. . . . . . .SMF format data and song data
converted using SMF conversion software (CASIO CM2 format)
Recorder Area. . .Song data recorded on the digital piano (CASIO CSR format)
PREPARATION
•Insert the SD memory card that contains the data you want to transfer into the digital piano’s SD memory card slot.
IMPORTANT!
•Never perform any operation on the digital piano while data is being saved to or transferred from an SD memory card. Performing any operation can cause SD memory card data to be deleted or damaged, making transfer of the data impossible.
To transfer song data from an SD memory card to the digital piano user area
1. Press the TONE/SONG button so the SONG lamp is lit.
2. Use the + and – buttons to display the number of the user area song (Music Library song number 61 through 70) to which you want to transfer the data.
This mark indicates that the currently displayed user area song number has data stored already.
3. Hold down the CARD button until its lamp starts to flash slowly and “LdU” (Load User area) appears on the display.
4. Use the + and – buttons to display the file number of the data you want to transfer to digital piano memory.
5. When everything is the way you want, press the TEMPO/SETTING button to begin data transfer.
•The message “CPL” (ComPLete) will appear on the display to let you know when data transfer is complete. The number of the user area to which the data was transferred will be shown on the display.
zTo interrupt an ongoing data transfer operation, press the CARD button.
zIf the user area song number you select already contains data, pressing TEMPO/SETTING in step 5 will display “rEP” (rEPlace) to confirm that you
want to replace the existing data with the data you are transferring. Press the S/YES button to replace the data. To cancel the operation, press the T/NO button in place of the S/YES button.