Operations Common to All Modes

Inputting Text Characters

Use the procedures in this section to input or edit names.

Example: When creating a new phrase and saving data (For details, see “Recording and Playing Back Phrases” on page E-18.)

If you are saving a newly created phrase in Digital Piano memory, display the Digital Piano’s save menu (“Saving Data”, page E-11) before trying to input characters using the procedure below.

•With this method, you select one of the characters shown below.

•For information about characters that are supported when using a USB flash drive, see “Renaming a USB Flash Drive File” (page E-33).

1. Use the ds (u), dt (w), ek (q), and el (i) buttons to move the cursor to location where you want to input the character.

2. You can use either of the methods below to select a character and input it.

•Method 1

Press the eo minus (–)or plus (+) button to scroll sequentially through characters and symbols. With this method, each time you press the eo minus (–)or plus (+) buttons at the same time, input jumps to the first character of a group in the following sequence: Symbols 3 Numerals 3 Upper case 3 Lower case.

•Method 2

Press the en (NUM KEY) button so its lamp becomes lit.

Next, use the 12 buttons from dl to em to input letters as shown in the illustration below. Each press of a button cycles through the letters assigned to it at the current cursor location.

After inputting the letters you want, press the en (NUM KEY) button so its lamp becomes unlit.

Symbols (Part 1)

Numerals

ABC DEF GHI JKL

MNO PQRS TUV WXYZ

(Upper/lower case toggle)

Symbols (Part 2)

NOTE

•You can also input numbers and characters using the Digital Piano’s knobs. For more information, see the separate “Tutorial”.

E-10