Power Outlet

Your Digital Piano runs on standard household power. Be sure to turn off power whenever you are not using the Digital Piano.

Using an AC Adaptor

Use only the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digital Piano. Use of a different type of AC adaptor can cause malfunction of the Digital Piano.

Specified AC Adaptor: AD-A12150LW

Use the supplied power cord to connect the AC adaptor as shown in the illustration below.

Household power outlet

 

Power cord

DC 12V terminal

AC adaptor

 

• Configuration and type depends

 

on your geographic location.

Note the following important precautions to avoid damage to the power cord.

During Use

Never pull on the cord with excessive force.

Never repeatedly pull on the cord.

Never twist the cord at the base of the plug or connector.

During Movement

Before moving the Digital Piano, be sure to unplug the AC adaptor from the power outlet.

During Storage

Loop and bundle the power cord, but never wind it around the AC adaptor.

IMPORTANT!

Never connect the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digital Piano to any other device besides this Digital Piano. Doing so creates the risk of malfunction.

Make sure the Digital Piano is turned off before plugging in or unplugging the AC adaptor.

The AC adaptor will become warm to the touch after very long use. This is normal and does not indicate malfunction.

Using Batteries

You can use eight AA-size batteries for power.

Use alkaline batteries.

Never use oxyride or any other nickel based batteries.

1. On the back of the Digital Piano on the right, loosen the two screws that secure the battery cover in place.

The screws are designed so they can be loosened only, and not come completely out.

Screws

Battery cover

2. Slide the battery cover away from you to remove it.

3. Load eight AA-size batteries into the battery compartment.

Make sure the positive + and negative - ends of the batteries are facing as shown in the illustration.

4.Replace the battery cover and slide it towards you (the reverse of what you did in step 2) to close it.

Make sure that the tabs of the battery cover engage with the tabs of the Digital Piano.

Tabs

5. Secure the battery cover by tightening the two screws you loosened in step 1.

English

E-5