Other Useful Functions
Deleting Data
Use the procedure below to delete specific edited or recorded data (tones, arpeggios, phrases, songs, stage setups) from Digital Piano memory.
1. Press the bm (SYS SETTING) button.
2. Use the dt (w) and ek (q) buttons to select “Initialize”.
3. Use the ds (u), dt (w), ek (q), and el (i) buttons to select the type of data you want to delete.
•To delete one stage setup: Init Stage Set
•To delete one user tone: Init Tone
•To delete one user arpeggio: Clear Arpeggio
•To delete one recorded phrase: Clear Phrase
•To delete one recorded song: Clear Song Seq
•To delete all data: Initialize All
4.Select the number of the data you want to delete.
•For details about how to do this, see “Changing a Number or a Value” in “Operations Common to All Modes” (page
•If you selected “Initialize All” in step 3 of the above procedure, you do not need to select a data number here.
5.Press the em (ENTER) button.
This will display a confirmation message “SURE?”.
•If you want to cancel the delete operation, press the eo (NO) or dr (EXIT) button.
6.Press the eo (YES) button.
The message “Please Wait” will remain on the display while the operation is being performed. Do not perform any operation while this message is on the display.
“Complete” appears on the display after data delete is complete.
zFor information about other setting items that appear on the display when the bm (SYS SETTING) button is pressed, see the separate “Tutorial”.