Recording Your Keyboard Play

3. Start recording.

For details about how to do this, see “Starting and Stopping Recording” in “Operations Common to All Modes” (page E-12).

This will start recording to the USB flash drive. The message “Audio Recording . . .” will appear on the display.

NOTE

Do not remove the USB flash drive from the USB flash drive port while the AUDIO RECORDER button lamp is lit or flashing. Doing so will interrupt recording and may corrupt data.

To exit the Audio Recorder, press the er (AUDIO RECORDER) button the required number of times until its lamp goes out.

To record keyboard play while playing back a phrase or song

1. Select the phrase or song you want to play back.

Phrase: Perform steps 1 through 3 under “Listening to a Phrase” (page E-20).

Song: Perform steps 1 and 2 under “To play back a song” (page E-22).

2.Press the er (AUDIO RECORDER) button the required number of times until the button lamp starts to flash.

3.Start recording.

For details about how to do this, see “Starting and Stopping Recording” in “Operations Common to All Modes” (page E-12).

At the point where you want to start phrase or song playback while recording, press the cr (START/ STOP) button.

To turn off playback and continue recording, press the cr (START/STOP) button again.

4.To stop recording, press the cs (RECORD) button.

The cs (RECORD) button lamp will go out to let you know that audio recording is stopped. Phrase/song playback also will automatically stop at this time.

To exit the Audio Recorder, press the er (AUDIO RECORDER) button the required number of times until the button lamp goes out.

NOTE

A MIDI file (SMF) cannot be played back during recording.

To play back performance data recorded on a USB flash drive

1. Press the er (AUDIO RECORDER) button

the required number of times until the button lamp is lit.

This will display the audio file selection screen.

2. Use the eo (–, +) buttons to select a song.

The eo (–)button scrolls through the recorded songs in order from the newest (most recently recorded) to the oldest.

The eo (+) button scrolls from the old to the new.

3.Start playback.

For details about how to do this, see “Starting and Stopping Playback” in “Operations Common to All Modes” (page E-11).

To scroll back, hold down the cm (SONG) button as you press the cn (REW) button. To scroll forward, hold down the cm (SONG) button as you press the co (FF) button. This operation can be performed only while an audio file is playing back.

You can pause playback by holding down the cm (SONG) button as you press the cp (PAUSE) button. This operation can be performed only while an audio file is playing back.

A MIDI file (SMF) and audio file cannot be played back simultaneously.

To exit the Audio Recorder, press the er (AUDIO RECORDER) button the required number of times until its lamp goes out.

E-24