Reference

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

 

 

 

 

 

 

 

 

 

 

Problem

 

Cause

Action

See Page

 

No sound is produced when I

 

1. The VOLUME controller is set to

1. Rotate the VOLUME controller more

) E-6

 

press a keyboard key.

 

“MIN”.

towards “MAX”.

 

 

 

 

2. This Digital Piano does not have

2. Connect audio equipment, an amplifier,

) E-7

 

 

 

built-in speakers. Nothing will

or headphones.

 

 

 

 

sound if an output device is not

 

 

 

 

 

connected.

 

 

 

 

 

 

 

 

 

The pitch of the Digital Piano

 

1. Digital Piano tuning is incorrect.

1. Adjust Digital Piano tuning, or turn the

) Tutorial

 

is off.

 

 

Digital Piano off and then back on again.

 

 

 

 

2. The Digital Piano’s key setting is

2. Change the key setting to “440.0 Hz”, or

 

 

 

 

something other than “440.0 Hz”.

turn Digital Piano power off and then

 

 

 

 

 

back on again.

 

 

 

 

3. A non-standard temperament

3. Change the temperament setting to

 

 

 

 

setting is being used.

“00:Equal”, which is the standard

 

 

 

 

 

modern tuning.

 

 

 

 

4. Octave shift is enabled.

4. Change the octave shift setting to 0.

 

 

 

 

 

 

 

 

Tones and/or effects sound

 

The “Auto Resume” feature is

Turn off “Auto Resume”. Next, turn power

) E-27

 

strange. Turning power off

 

turned on.

off and then back on again.

 

 

and then back on again does

 

 

 

 

 

not eliminate the problem.

 

 

 

 

 

Example: Note intensity does

 

 

 

 

 

not change even though I

 

 

 

 

 

alter key pressure.

 

 

 

 

 

 

 

 

 

 

 

Chorus, reverb, and/or delay

 

1. Lower the system effect send

1. Change the system effect send and/or

) Tutorial

 

are not being applied.

 

and/or return level.

return levels to greater values.

 

 

 

 

2. A small value is selected for the

2. Select a larger value for the effect

 

 

 

 

effect setting of an effect

setting of the effect parameter.

 

 

 

 

parameter.

 

 

 

 

 

 

 

 

 

I cannot transfer data after

 

—

1. Check to make sure that the USB cable

) E-36

 

connecting the Digital Piano

 

 

is connected to the Digital Piano and

 

 

to a computer.

 

 

computer, and that the correct device is

 

 

 

 

 

selected with your computer’s music

 

 

 

 

 

software.

 

 

 

 

 

2. Turn off the Digital Piano and then exit

 

 

 

 

 

the music software on your computer.

 

 

 

 

 

Next, turn the Digital Piano back on and

 

 

 

 

 

then restart the music software on your

 

 

 

 

 

computer.

 

 

 

 

 

 

 

 

I cannot store data to a USB

 

—

See “Error Messages”.

) E-35

 

flash drive or load data from a

 

 

 

 

 

USB flash drive.

 

 

 

 

 

A tone’s quality and volume

 

This is an unavoidable result of the digital sampling process*, and does not indicate

 

sounds slightly different

 

malfunction.

 

 

 

depending where it is played

 

* Multiple digital samples are taken for the low range, middle range, and high range of the

 

on the keyboard.

 

original musical instrument. Because of this, there may be a very slight difference in tonal

 

 

 

quality and volume between sample ranges.

 

 

 

 

 

 

When I press a button, the

 

Performing a button operation while playing with the recorder, or other functions can cause

 

note that is sounding cuts out

such phenomena when the Digital Piano switches internal tone effects. It does not indicate

 

momentarily or there is a

 

malfunction.

 

 

 

slight change in how effects

 

 

 

 

 

are applied.

 

 

 

 

 

 

 

 

 

Even though I play on

 

The ranges of certain tones are limited, which means that octaves change normally up to a

 

different ranges of the

 

certain low note or high note. With such a tone, the notes of the lowest octave will be repeated

 

keyboard, the notes do not

 

to the left of the lowest possible note, and the highest octave will be repeated to the right of

 

change octaves.

 

the highest possible note. This is due do limitations in the range of the original musical

 

 

 

instrument for each tone, and does not indicate malfunction of the Digital Piano.

 

E-38