Operations Common to All Modes

Saving Data

Use the procedure below to save edited and registered data to Digital Piano memory.

1. Press the eq (WRITE) button.

2. If the data lets you change its number or data name, perform the procedure under “Inputting Text Characters” on page E-10.

•You can also input numbers with the 10-key pad. For details, see “To input a number with the 10-key pad” in “Operations Common to All Modes” (page E-9).

•To specify a number, move the cursor to the location where the number is located.

•To specify a name, move the cursor to the first character of the location where the name is located.

3.Press the em (ENTER) button.

This will display a confirmation message “SURE?”.

•If you want to cancel the save operation, press the eo

(NO) or dr (EXIT) button.

4.Press the eo (YES) button.

The message “Please Wait” will remain on the display while the operation is being performed. Do not perform any operation while this message is on the display.

“Complete” appears on the display after data save is complete.

•If there is already data at the location you are saving the new data or if there is already a file with the same name you specified, a message “Replace?” will appear asking if you want to overwrite the existing data with the new data. Press the eo (YES) button to overwrite or the (NO) button to cancel the save operation.

Starting and Stopping

Playback

Use the procedure below with functions that allow playback of data.

1. Press the button of the function you want to use the required number of times until the button lamp is lit.

The button of each function has a lamp. When the lamp of a function button is lit, it means the function is standing by for playback.

•cm (SONG) button: Song sequencer playback (page E-21)

•cq (PHRASE) button: Phrase sequencer playback (page E-18)

•er (AUDIO RECORDER) button: Audio recorder playback (page E-23)

2.Press the cr (START/STOP) button to start playback.

3. Press the cr (START/STOP) button to stop playback.

English

E-11