General Guide
Saving Settings and Using Panel Lock
Your Digital Piano lets you save its current settings, and lock its buttons to protect against operation errors. For details, see “Auto Resume” (page
Returning the Digital Piano to Its Factory Default Settings
Perform either of the following two procedures when you want to return the Digital Piano’s stored data and settings to their initial factory defaults.
■Method 1
1. Hold down the bk (P) button to turn off the Digital Piano.
•For details, see “Turning Power On or Off” (page
2.While holding down the dq (4) button and en (NUM KEY), press the bk (P) button. Keep the dq (4) and en (NUM KEY) buttons depressed until the message “INITIALIZING” appears on the display.
After initialization is complete, display contents return to normal.
■Method 2
1. Press the bm (SYS SETTING) button.
2. Use the dt (w) and ek (q) buttons to select “Initialize”.
3. Use the ds (u), dt (w), ek (q), and el (i) buttons to select “Initialize All”.
4. Press the em (ENTER) button.
This will display a confirmation message “SURE?”.
•If you want to cancel the initialization, press the eo
(NO) or dr (EXIT) button.
5.Press the eo (YES) button to initialize.
The message “Please Wait” will remain on the display while the operation is being performed. Do not perform any operation while this message is on the display.
“Complete” appears on the display after initialization is complete.
Separate Tutorial Manual
You can download a separate tutorial manual from the CASIO website below.
http://world.casio.com/
| B | |
|
|