Projection Operations

Manual Keystone Correction

Manual keystone correction can be used to correct for vertical keystoning.

To use manual keystone correction

1. Press the [KEYSTONE] key.

zThis causes the keystone correction screen to appear on the projected image.

2. Use the [W] and [X] keys to correct for keystoning.

zEach press of [W] or [X] shifts the indicator on the currently selected bar left or right.

zKeystone correction is possible within the range that the indicator is able to move within the selected bar. Depending on conditions, the indicator may not move all the way to either end of the bar.

3. To close the setup screen, move the cursor to “Close”, and then press the [ENTER] key.

zYou can also close the setup screen by pressing the [ESC] or [KEYSTONE] key.

10