Projection Operations

Projecting onto a Screen

This section explains the basic steps for projecting an image.

Basic Flow

Preparing the Projector

Starting

Projection

Set up the projector and point it at the screen.

￿User’s Guide (Basic Operations): Setting Up the Projector

Connect the computer or video device to the projector.

￿User’s Guide (Basic Operations): Connecting a Computer to the Projector

￿User’s Guide (Basic Operations): Connecting to a Standard Video Device

Turn on the projector and the connected computer or video device.

Press the [] (power) key to turn on the projector.

￿User’s Guide (Basic Operations): Turning On the Projector

Perform fine adjustment of the projection position and angle.

￿User’s Guide (Basic Operations): Adjusting the Projector Elevation Angle

Select the input source.

￿“Manually Selecting the Input Source” (page 6)

Adjust the projected image size and focus the image.

￿“Zoom and Focus” (page 7)

Start projection (presentation, video, etc.).

Perform the required operation on the input source computer or video equipment.

Use the projector’s various functions to adjust the projected image as required.

4