Casio XJ-360 Freezing the Projected Image (FREEZE), Displaying the Pointer, To display the pointer, To freeze the projected image

Projection Operations

Freezing the Projected Image (FREEZE)

The freeze function stores the current projected image in projector memory, and projects it as a still image.

To freeze the projected image

1. On the remote controller, press the [FREEZE] key.

z This freezes the image that was being projected when you pressed the [FREEZE] key.

2.To unfreeze the image, press the [FREEZE] key again or press the [ESC] key.

Displaying the Pointer

Use the procedures in this section to display the pointer and to select its shape (arrow, bar). You can use the pointer to point to a specific location of the projected image during a presentation.

To display the pointer

Press the [POINTER/SELECT] key to display the pointer in the projected image.

The following operations can be performed while the pointer is displayed.

zPressing the [STYLE] key (the [ENTER] key functions as the [STYLE] key while the pointer is displayed) rotates the pointer, causes it to blink, etc. If you are using an arrow pointer, for example, each press of the [STYLE] key cycles through four different pointer orientations.

zThe cursor keys can be used to move pointer around the image. Holding down a cursor key moves the pointer at high speed.

14