Using the Setup Menu

Setup Menu Screen Operations

This section explains projector operations you need to perform while configuring setup menu settings. It also provides details about each sub-menu item type.

Basic Setup Menu Operations

The following is the general flow of the steps you need to perform when configuring setup menu operations.

1. Select the input source whose settings you want to configure.

2. Press the [MENU] key.

zThis causes the setup menu screen to appear in the upper left corner of the projected image. At this time, only the main menu will be visible.

3. Press the [T] key.

zThis will highlight the “Image Adjustment” on the main menu, indicating that it is selected. Also, the “Image Adjustment” sub-menu will appear to the right.

Main menu

Sub-menu

Currently selected menu item

zThe items that appear in the sub-menu depend on the input source you selected in step 1 and whether or not a signal is being input from the input source. For details, see “Setup Menu Overview” on page 16.

19