Projection Operations

Adjusting the Volume Level (VOL +/–)

You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker.

To adjust the volume level

1. On the remote controller, press the [VOL +] or [VOL –] key.

zThis causes the [Volume] screen to appear on the projected image.

2.Press the [VOL +] key or the [X] key to increase the volume, or the [VOL –] or [W] key to lower the volume.

3.To close the setup screen, move the cursor to “Close”, and then press the [ENTER] key.

zYou can also close the setup screen by pressing the [ESC] key.

Muting the Image and Audio (MUTE)

The mute function causes the projected image to go to black screen, and stop output of the audio from the speaker.

To mute the image and audio

1. On the remote controller, press the [MUTE] key.

zThis causes the projected image to go to a black screen, and stops output from the speaker.

2.To restore the image and audio, press the [MUTE] key again or press the [ESC] key.

12