Using the Setup Menu

Signal Settings J Noise Filter

This sub-menu provides a choice of noise filter levels to remove digital noise from the projected image when RGB is selected as the input source. Note that the noise filter may not be able to remove certain types of digital noise.

zThis setting is possible only when RGB is selected as the input source. The setting is saved for the RGB input source only.

zTurning off the projector automatically returns this sub-menu to its initial default setting (Normal).

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

Low, (Normal), High

 

 

Component

None

 

 

S-VIDEO

 

 

 

VIDEO

 

 

 

No Signal

 

 

 

Signal Settings J Restore Menu Defaults

This sub-menu returns all of the sub-menu items on the Signal Settings main menu to their initial default settings.

z“Signal Settings” main menu “Vertical Position”, “Horizontal Position”, “Frequency”, and “Phase” settings are initialized for the current signal type (XGA/60Hz, SXGA/60Hz, etc.) only.

zFor details about the initialization procedure, see “To initialize the settings of a particular main menu item” on page 25.

Screen Settings

Screen Settings J Keystone Correction

This sub-menu lets you correct for vertical keystoning of the projected image.

zVertical keystone correction can be performed regardless of the currently selected input source.

zA single setting is stored, which is applied to all input sources.

31