Using the Setup Menu

Detailed Settings J Power On Password, Change Password

This sub-menu lets you turn the power on password on and off.

While the password is turned on, projector operation is impossible unless the correct password is entered.

For more information about the power on password, see “Password Feature” on page 52.

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

On, (Off)

 

 

Component

 

 

 

S-VIDEO

 

 

 

VIDEO

 

 

 

No Signal

 

 

 

Setting Explanation

On: Turns on the power on password, which requires input of a password to turn on the projector.

Off: Turns off the password, which allows the projector to be operated without inputting a password.

Setting Storage

A single setting is stored, which is applied to all input sources.

Initial Factory Default Password

The following is the 8-key operation you should perform to input the initial factory default password.

[S][X][T][W][S][T][W][X]

zNote that the projector’s password is not really a “word”, but rather a series of remote controller key operations.

zIf you need to keep projector operation secure, be sure to change the initial factory default password to a different one as soon as possible.

zThe password can be input using the remote controller only. Optimum security is ensured by turning on the password and keeping the remote controller with you.

zFor information about what you should do if you forget your password, see “If you forget your password...” on page 52.

37