Using the Setup Menu

■Detailed Settings J Advanced Settings 2 J Video Signal, S-Video Signal

This sub-menu specifies the input signal for the projector’s VIDEO and S-VIDEO input terminals.

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

None

 

 

Component

 

 

 

S-VIDEO

(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

 

 

VIDEO

 

 

 

No Signal

(Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

 

* Only when the currently selected input source is VIDEO or

 

S-VIDEO.

 

 

Setting Explanations

Auto:

Select this setting to have the projector switch the video signal system

 

automatically in accordance with the input signal from the video device

 

that is connected to the VIDEO or S-VIDEO input terminal. This is the

 

setting you should normally use.

Other settings: Each setting selects the applicable video system. Use these settings when you want to specify only one specific video signal for the VIDEO and S-VIDEO input terminals.

Setting Storage

This setting is saved for the VIDEO and S-VIDEO input terminals only.

■Detailed Settings J Advanced Settings 2 J Image Enhancement 1/ Image Enhancement 2

Image Enhancement 1/Image Enhancement 2 improves the readability of an image following keystone correction. You should select the Image Enhancement setting (1 or 2) based on which one produces the desired results, the type of image you are projecting, projection conditions, etc.

Input Source Specific Menu Items

Input Source

Available Items (Parentheses indicate defaults.)

 

 

RGB

(On), Off

 

 

Component

 

 

 

S-VIDEO

 

 

 

VIDEO

 

 

 

No Signal

 

 

 

45