
Using the Setup Menu
Using the Password Input Dialog Box
The password input dialog box will appear when any one of the following occurs.
zWhen you turn on the projector while the password is turned on.
zWhen you turn the password on or off.
zWhen you change the password.
When this dialog box is shown, perform a remote controller key operation for each of the password input positions. The following explains how to input numbers.
zThe cursor is flashing at the first (leftmost) input position.
zThe cursor is used to select an input position for input.
zUse the remote controller cursor keys to input the password.
zEach time you perform a remote controller key operation, “” appears at the current input position, and the cursor moves to the next input position to the right.
zA password can be from one to eight key operations long.
zAfter performing all of the key operations you want, press the [ENTER] key.
zTo clear your input, press the [ESC] key.
To turn the power on password on and off
1. Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 19. Select the “Detailed Settings” main menu, and then select the “Power On Password”
2. Press the [ENTER] key.
zThis displays a password input dialog box.
3.Input the current password.
zThe initial factory default password is: [S][X][T][W][S][T][W][X].
zFor information about how to input the password, see “Using the Password Input Dialog Box”.
4.Press the [ENTER] key.
zIf the password you input does not match the currently registered password, the message “The password you input is wrong”. appears. Press the [ENTER] key to return to step 1.
zIf the password you input matches the registered password, pressing [ENTER] above will display the message “The password you input is correct!”. Press the [ENTER] key to advance to the next step.
38