Projection Operations

Using Color Mode (COLOR MODE)

The color mode setting lets you specify the type of image you will be projecting, so the projector can optimize image color.

To change the color mode setting

1. Press the [COLOR MODE] key.

zThis causes the color mode screen to appear on the projection image. The z mark indicates the current color mode setting.

zFor details about each of the settings, see “Image Adjustment J Color Mode” on page 28.

2.Use the [S] and [T] keys to move the cursor to the setting you want, and then press the [ENTER] key.

zThis moves the z to item that is selected by the cursor, and applies the setting to the image.

3.To close the setup screen, move the cursor to “Close”, and then press the [ENTER] key.

zYou can also close the setup screen by pressing the [ESC] or [COLOR MODE] key.

11