Cerwin-Vega CVM-1224FXUSB Rear Panel Controls, Ac Adaptor In Connector, Power Switch, Usb Port

USB Compatibility*

REAR PANEL CONTROLS

(1). AC ADAPTOR IN CONNECTOR

Connects to the included power adaptor.

NOTE: Use only the adaptor included with this mixer. Use of a different adaptor may result in fire or electric shock.

(2). POWER SWITCH

Use this switch to turn mixer power to ON or OFF.

(3). MAIN L/R OUTPUT XLR JACK

These jacks deliver stereo output of the mixer signal. You use these jacks, for example, to connect to the power amplifiers driving your main speakers. You also use these jacks when you wish to record the signal utilizing the level control applied by the main fader in the main control section.

(4). USB PORT

A standard Type-A to Type-B cable is required to connect the mixer to a computer or laptop. The built-in stereo USB audio interface allows you to record and playback from a desktop or laptop computer using virtually any digital recording software. Payback adjustment is made using the TAPE IN/USB level knob. Connecting the audio mixer to your computer is a simple procedure that takes just a few minutes. Since the Cerwin-Vega audio mixer is USB compliant, you can use either a MAC or Windows-based PC. You will find detailed instructions on setting up the audio mixer in either MAC or Windows-based computers in the following sections of this manual.

Windows 7

Windows Vista

Windows XP

MAC OS X

*For compatibility on new operating systems, please contact Customer Service.

13