Cerwin-Vega CVM-1224FXUSB manual USB Audio Interface Windows

USB AUDIO INTERFACE (Windows 7)

1.The first time you plug the audio mixer into a USB port, Windows will install the universal drivers for that port. A balloon tip will pop-up, telling you it recognizes the connection and will install the device driver.

2.When the drivers have finished installing, the balloon tip will refresh itself and tell you installation is complete.

Note: This balloon will not pop up again once the driver has been installed.

3.Most of the time, you’ll want the output volume from the computer at the maximum position, but sometimes it defaults to the middle of the slider, making the output very quiet. The volume can be increased in several ways. The simplest is to click the loudspeaker icon in the system tray and adjust the slider volume level.

14

4.Press ‘Mixer’ in the volume slider window to open up the Volume Mixer window. To use the audio mixer as your default output device, ensure that it is set for speakers in the Volume Mixer window by setting the default device to ‘USB Audio CODEC’.

5.Another way to set the default record and playback to the audio mixer is in the Control Panel. Select the Sound icon to open up a new window. Right-click on the icon that lists ‘USB Audio CODEC’ and select ‘Set as default’. A check mark on the icon indicates the device is set to default.

6.To prevent system sounds from coming through the audio mixer, select a different sound device for the system default, and then choose the audio mixer manually within your DAW software.