FRONT PANEL CONTROLS – MAIN CONTROL SECTION

(1). VFX PROGRAM DISPLAY

The Program LED displays the number of the selected effects program. Use the table located above the VFX (EFX)ON/OFF switch to lookup the desired effects.

(2). VFX PROGRAM SELECT SWITCH

This program knob selects one of the 100 built-in digital effects, for each number you select. The VFX programs feature a 24 Bit Digital Effects processor with high quality, studio grade effects like Delay, Chorus and Reverb.

(3). AUX PRE CONTROL

Adjust the level of the signal sent from the internal digital effect to the AUX bus.

(4). VFX (EFX) ON/OFF SWITCH

This switch turns the internal digital effect on/off.

(5). PFL SWITCH

Set this switch on if you wish to output the effect signal to the PFL bus.

(6). PFL INDICATOR

This indicator lights when the PFL switch is turned on.

(7). EFX RTN Fader

Adjust the level of the signal sent from the internal digital effect to the main bus.

(8). ALT 3/4 OUTPUT FADER

This fader adjusts the final level of the combined stereo signal sent to the ALT 3/4 output jacks.

(9). MAIN L/R MASTER FADER

These faders adjust the final level of the combined signals from all channels.

(10). TO MAIN L/R SWITCH

When this switch is on, the signal of each ALT 3/4 will be sent to the MAIN L/R buses.

8

Page 8
Image 8
Cerwin-Vega CVM-1224FXUSB manual Front Panel Controls Main Control Section